3 Important Things To Remember When Changing Hydraulic Seals

Posted on: 25 April 2017

Even though there are various things that can cause problems with hydraulic cylinders, one of the first problems that you will probably want to look for is a problem with the seals. Faulty, worn-out seals are a very common cause of hydraulic cylinder problems, and luckily, they are some of the easiest parts to change. Swapping out your hydraulic seals should help you get the results that you're looking for, but there are a few tips that you should remember during the process for best results.

1. It's Worth it to Buy Better Seals

First of all, when buying replacement seals for your hydraulic cylinders, remember that it can be worth it to spend a little more for higher-quality seals. Overall, seals are considered to be quite affordable, particularly when compared to other common parts for hydraulic cylinders. However, even though they are cheaper parts, they do an incredibly important job and are put under a lot of pressure and strain during everyday use. Therefore, if you're able to, consider spending just a little more for better, higher-quality seals from a name brand that you can trust, such as Hydraulic Hose & Cylinder Inc

2. Clean and Dry Seals Before Use

Many people make the common mistake of removing rubber hydraulic seals from their packages and putting them to use immediately. However, to help prevent any problems with the seal, it pays to clean them off and then dry them thoroughly first. Hydraulic seals can become dusty if they aren't used quickly, for example, and the dust could get in the way of a proper seal. They can also get dirty or greasy from being handled. Washing and drying them before use can help you ensure that they fit tightly, as they are supposed to.

3. Avoid Using Metal Objects

When using hydraulic seals, avoid using screwdrivers or other metal objects to put them into place. Metal can easily tear your seals, and even a small tear can prevent them from working properly. This could mean that your work is all a waste, since you could end up with yet another leak right after replacing your seals if you aren't careful about what you use to put them on.

In many cases, all you have to do in order to repair a leaky hydraulic cylinder is to replace the seals. If you remember these three tips when doing so, you can help ensure that your project of changing the seals is a success.    

Share